Limited Warranty; Service; Troubleshooting - Medtronic MIDAS REX series Bedienerhandbuch

EN
These sterilization guidelines are only recommended guidelines
and may vary among hospitals depending upon the type of
sterilization equipment and possible pathogens in their particular
areas. These guidelines represent exposure time and not total cycle
time. The recommended sterilization parameters may be modified
based on standard hospital sterilization protocol. The bone mill
base should be sterilized in accordance with the guidelines in the
Midas Rex™ Electric Bone Mill user's guide. It must be allowed to
cool prior to use. The metal portion of the bone mill base must be
less than 40ºC prior to use. Cooling time required will vary based
on sterilization containers used, wrapping method, etc. Use of the
bone mill base while still hot from sterilization (flash sterilization)
may cause the motor to overheat and fail.

Limited Warranty*

(U.S. Customers Only)
A. This Limited Warranty provides the following assurance to the
purchaser of a Medtronic Midas Rex™ Electric Bone Mill. The Midas
Rex™ Electric Bone Mill includes the Console, and Base (hereafter
referred to as "Components"), and the Disposable Bowl, Cap and
Spatula (hereafter referred to as "Accessory") and jointly referred to as
Midas Rex™ Electric Bone Mill, unless specifically noted.
(1) Should a Component fail to function within normal tolerances
due to a defect in materials or workmanship within a period of
one (1) year from the date of shipment of the new Component,
or 180 days from the date of shipment of the serviced or
refurbished Component to the purchaser (but not less than
the one year period from the date of shipment of the new
Component), or
(2) Should an Accessory fail to function within normal tolerances
due to a defect in materials or workmanship within a period
of 90 days from the date of shipment of a new Accessory or
serviced or refurbished Accessory to the purchaser.
(3) Medtronic will at its option: (a) issue a credit to the purchaser of
the replacement Component or Accessory equal to the Purchase
Price, as defined in Subsection A(4), against the purchase of any
same Component or Accessory requested as its replacement, or,
(b) provide a functionally comparable replacement Component
or Accessory at no charge.
(4) As used herein, Purchase Price shall mean the lesser of the
net invoiced price of the original or current functionally
comparable, or replacement Component or Accessory.
B. To qualify for this Limited Warranty, these conditions must be met:
(1) The Midas Rex™ Electric Bone Mill must be used in accordance
with the labeling and Instruction Manual provided with the
products.
(2) Only Midas Rex™ Electric Bone Mill Accessories that are
manufactured, authorized, and quality controlled by Medtronic
may be used.
(3) No reprocessed Accessory sets may be used.
(4) The Midas Rex ™ Electric Bone Mill may not be damaged by
accident, abuse, misuse or tampering.
(5) The Midas Rex ™ Electric Bone Mill or Midas Rex ™ Electric
Bone Mill Accessories may not be modified without the written
permission of Medtronic.
C. This Limited Warranty is limited to its express terms. In particular:
(1) Except as expressly provided by this Limited Warranty,
MEDTRONIC IS NOT RESPONSIBLE FOR ANY DIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED ON
ANY DEFECT, FAILURE OR MALFUNCTION OF THE Midas
Rex ™ Electric Bone Mill TO FUNCTION WITHIN
NORMAL TOLERANCES WHETHER THE CLAIM IS BASED
ON WARRANTY, CONTRACT, NEGLIGENCE, STRICT
LIABILITY, OR OTHER TORT OR OTHERWISE.
8
(2) This Limited Warranty is made only to the purchaser. AS TO
ALL OTHERS, MEDTRONIC MAKES NO WARRANTY,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, WHETHER
ARISING FROM STATUTE, COMMON LAW, CUSTOM OR
OTHERWISE.
(3) The exclusions and limitations set out above are not intended
to, and should not be construed so as to contravene mandatory
provisions of applicable law. If any part or term of this Limited
Warranty is held to be illegal, unenforceable or in conflict with
applicable law by a court of competent jurisdiction, the validity
of the remaining portions of the Limited Warranty shall not
be affected, and all rights and obligations shall be construed
and enforced as if this Limited Warranty did not contain
the particular part or term held to be invalid. This Limited
Warranty gives the purchaser specific legal rights. The purchaser
may also have other rights that vary from state to state.
(4) No such express or implied warranty to the purchaser shall
extend beyond the period specified in A(1) above.
(5) This Limited Warranty shall be the exclusive remedy available to
any person.
(6) No person has any authority to bind Medtronic to any
representation, condition, or warranty, except this Limited
Warranty.
*This Limited Warranty is provided by Medtronic Powered
Surgical Solutions, 4620 North Beach Street, Fort Worth, Texas
76137-4116. It applies only in the United States. Areas outside the
United States should contact their local Medtronic representative
for terms of the warranty.

Service

The Midas Rex™ Electric Bone Mill is not user-serviceable, and
no preventive maintenance or calibration procedures are required
except for the directions listed in this manual.
PRECAUTION
Please see Precaution 8

Troubleshooting

SYMPTOM ISSUE
The blades do not Loose
turn with the run connection
switch depressed:
Bone stuck
under blade.
If there is still a problem with the Midas Rex™ Electric Bone Mill
Contact Medtronic Customer Service at 1-800-335-9557 or FAX: 817-
788-6441
ACTION
Ensure that the power cable
and the control switch cable
are fully engaged in the
receptacles.
Ensure that power is Off and
using spatula rotate blade in a
clockwise direction.
MIDAS REX™ ELECTRIC BONE MILL MIDAS REX™ ELECTRIC BONE MILL