Receiving A Group Call - Motorola MTM800 Bedienungsanleitung

speak into the microphone. Release the PTT button to
listen.
3. To call a talkgroup other than the one shown, press a
navigation key to scroll through the talkgroups. Press Ok to
select the talkgroup. Press PTT to start the call in the new
talkgroup
4. To select a range other than the one
shown, press Optns and then Range.
Use the arrow keys to scroll through the
ranges. To cancel range scrolling, press
Back.
Press Ok to select the range (or PTT to start the call in the
new range). The call is set up in the new range and last
selected talkgroup in this range.
When you start a call, the members of the selected talkgroup
who have their terminals turned on, will receive the
transmission.
The 'No Group' message is displayed when you are out of the
normal coverage area of your selected talkgroup. If so, select a
new talkgroup that is valid for your working location.

Receiving a Group Call

Unless it is engaged in an active call, your MTM800 will
automatically switch to Group Mode and receive the
transmission. To answer the call, press and hold PTT.
Your MTM800 shows the Group Name, and the caller's
private number or name (alias) if previously stored in your
address book. In case a favourite talkgroup is received, the
terminal will display the "My Groups" range and group alias.
.
1 abc
1 2 Range
3 Scanning
Back Ok
35