Covert Mode; Local Area Service - Motorola MTM800 Bedienungsanleitung

Muting/Unmuting the Microphone
During a Phone, PABX, or private Full-Duplex Call, use the
mute feature to:
• hold conversation without being heard by the caller.
• silence possible background noise in your area
1. Press Mute. The 'Mute' soft key is blinking when active.
The microphone is muted. You can hear the incoming
audio, but the caller cannot hear any speech coming from
your MTM800.
2. To speak, press Mute again. The 'Mute' soft key is no
longer blinking. The microphone is on.

Covert Mode

If configured by your Service Provider the Covert Mode gives
to you the ability to completely shut down all visible and
audible MTM800 alerts and notifications. This feature makes
the MTM800 effectively unnoticeable even in a silent and
dark environment.
To Enter the Covert Mode:
• Press the Cover Mode one-touch button (if programmed
by your Service Provider).
• Select Covert Mode in the Security menu (refer to
page 84).

Local Area Service

This mode, which is also called Fallback Mode, allows more
than one user from the same site to communicate when the
link between the site and network central controller fails.
Entering and exiting Local Area Service (that is, returning to
System Wide Services) is done automatically.
Entering Local Area Service
When the MTM800 receives a Local Area Service indication
from the system, the following occurs:
• the MTM800 sounds a tone
• the display shows the "Local Area Service" message.
25