Tones - Motorola MTM800 Bedienungsanleitung

Tones

Description
Idle
• Back to Home display
• Back to Rotary volume
use when Rotary scroll
timer expires
• Back to coverage
• Back to full service
Clear to send
Bad key press
• Good key press
• MTM800 self-test fails at
power up
• From out-of-service to
in-service
In Call
• Call clear warning
• Call modified
Call waiting tone while
Phone or Private Call are
pending
Data Connected or
Data Disconnected.
Talk Permit sounds upon
pressing the PTT.
Talk Permit without
gateway sounds upon
pressing PTT. The tone
indicates the gateway is
no longer available.
• Talk Prohibit
• System busy
• Time-out timer expire
• Called MTM800 not
available or busy.
= High Tone;
Type
= Low Tone
Repeated
Once
Once
Once
Once
Once
Every 6 seconds,
until a call is
terminated
Once
Once (Normal Tone)
Once (Short Tone)
Twice
Once
Until you release the
PTT
117