Selecting A Folder; Tmo Group Calls; Making A Tmo Group Call; Receiving A Tmo Group Call - Motorola Cleartone CM5000 Bedienungsanleitung

Selecting a Folder

From the Home display, press Optns. Select Folder, and
select the desired folder. The display shows the last selected
group in that folder.

TMO Group Calls

In TMO the CM5000 is used with your Service Provider's
infrastructure.

Making a TMO Group Call

1. From the Home display and if this is the required group,
press and hold the PTT.
2. Wait for the talk permit tone (if configured) and then speak
into the microphone. Release the PTT button to listen.
When you start a call, all members of the selected group who
have their units turned on, receives the Group Call.
The "No Group" message is displayed when you are out of the normal
coverage area of your selected group. You must then select a new
group that is valid for your working location.

Receiving a TMO Group Call

Unless it is engaged in a call, the CM5000 receives the
Group Call. To answer the call, press and hold PTT.
The CM5000 shows the group name and the caller's private
number or alias if previously stored in your contact list.

DMO Group Calls

In DMO the CM5000 can be used without your Service
Provider's infrastructure.
DMO allows communication with other terminals also
operating in DMO, which are on the same frequency and
group as the CM5000.
When you start a call, the members of the selected group
who have their units turned on receive the Group Call.
21