Motorola MTM800 Bedienungsanleitung Seite 45

DGNA Reception with Notification Message
When a DGNA is received and DGNA
notification was configured by your
Service Provider, you will get a tone
indication and notification message
("Programming Entries..."), and then a display of the new
assignments.
If DGNA notification was not configured by your Service
Provider, you will only get a tone indication and only if a
selected group was changed by the DGNA.
1. To view the added/deleted talkgroups
details press View. You may scroll
through the list using the
keys.
2. To return to the initial Mode display press Back.
3. To select the DGNA group, press Select. Or scroll to
another group using the navigation key, and press Select.
Once you exit the DGNA notification screen, the Select key
disappears. To select one of the newly added groups, see
page 30.
If configured, a newly added group will also become the
newly selected talkgroup.
If this group is de-assigned, and no group changes or power
cycling have occurred, the terminal will revert to its previous
talkgroup.
If a new DGNA is received during scrolling,
you will receive a message, indicating that
the list of talkgroups was updated.
After a few seconds the display returns to
the initial DGNA display detailing the
update.
If the DGNA received is an all "Talkgroups
delete" assignment, your MTM800 will
display the following:
6 TG Added
Back View
A: <name1>
<range>
Back Select
TG list
Updated
12 TG Removed
Back View
All TalkGroups
Deleted
Back
39