Scan - Motorola MTM800 Bedienungsanleitung

Scan (

7)
Menu
To enter the sub-menu, press
This sub-menu allows you to activate/deactivate scanning,
view the active scan list, and edit the scan lists.
It is not possible to enable or disable Talkgroup scanning in TXI
Mode.
Setting Talkgroup Scanning (
To enter the sub-menu,
press
Menu
This sub-menu allows you to activate/
deactivate the scanning of a list of
predefined talkgroups programmed in the MTM800. The
MTM800 will join any talkgroup call as long as this talkgroup
is defined in the scan list and scan is turned on.
Scroll to the desired setting and press Ok.
If it is set to Off, display shows the
following state:
When set to On, the display shows the
following state:
• The last selected scan list, or
• the first list in the scan lists.
To select a list other than the one shown,
scroll through the scan lists and press Set.
To change your selection:
• Select
or
• Enter Group mode and select Optns - Scan - 1 Select
List.
A message indicating that all scan lists are empty.
Select 3 Scan Lists to fill the scan list(s). See page 95.
When set to Off, scanning is deactivated.
94
Menu
7 Scan - 1 Scanning.
7 Scan - 1 Scanning - 1 Select List,
Menu
7 Scan.
Menu
7 1)
1 Scanning
2 Active List
3 Scan Lists
1 On
1 On
2 Select List
Back
1 Off
1 Off
2 Select List
Back
1 Scanning
Back Ok
Ok
Ok
Scan List:
Scan List 1
Back Set