Setup - Motorola MTM800 Bedienungsanleitung

DMO SCK (
Menu
Once in the menu, select 3 Security - 8 DMO SCK.
Key version is displayed when you select the option.
Air Interface encryption provides service confidentiality
between your MTM800 operating in Direct Mode and another
terminal or a group of terminals operating in Direct Mode.
You can change the current key, if the key change operation
is allowed by your Service Provider.
To change the key, if not in a call, select Next. The display
will show the following message: Change to version...
• Select Yes to change the key. Key version changed
display will appear.
• Select No to leave the key. Key version display will
appear.
Covert Mode (
From the main menu, select 3 Security - 9 Covert Mode.
Set Covert Mode to On
Select On. All tones are set to off, and the
backlight and the LED are disabled
immediately.
The audio is further more routed to the external loudspeaker
until the loudspeaker is switched off. It is recommended to use
e.g. a Telephone Style Handset in Covert Mode.
Set Covert Mode to Off
Select Off. All settings for tones and backlight are restored.
The LED is enabled and the message Covert Mode Off is
shown.

Setup (

4)
Menu
To enter the sub-menu, press
- 4 Setup - Ok.
Menu
84
3 8)
3 9)
Menu
1 On
2 Off
Back Ok
1 Ring Style
2 Language
3 Data Setup
Back Ok