Setting Backlight - Motorola MTM800 Bedienungsanleitung

The display shows the current setting:
Voice Only — The MTM800 will receive
and transmit voice calls only.
Data Only — The MTM800 acts as a
modem. The MTM800 will reject incoming and outgoing
voice calls, except for emergency calls, status and text
messages.
Voice & Data — The MTM800 acts as a modem but voice
calls will have priority over data calls and will interrupt them.
Scroll to the desired setting and press Set.
In Data Only and in Voice & Data modes, the "Data
Connected" icon is displayed after you have connected the
MTM800 to the external device and the MTM800 is ready for
data transfer. The Data Transmit/Receive icon indicates that
data transfer is currently taking place.
The MTM800 ends the Ambience Listening (AL) call and the
microphone is closed when the MTM800 is in one of the
following states:
• Entering the out-of-service area
• Outgoing packet data call setup
To exit data mode, return to 3 Data Setup and select Voice
Only. The MTM800 returns automatically to Voice
communication, except when in Data Only Mode.
Data services are available only in TMO. Data Services are
blocked in TXI Mode.

Setting Backlight (

Once in the Setup menu, select
4 Backlight.
This option allows you to configure your
MTM800's backlight setting (see also
"Dimming the Display" on page 26).
Your MTM800 has 4 backlight settings:
86
4 4)
Menu
1 Voice Only
1 Voice Only
2 Data Only
3 Voice & Data
Back Set
1 Manual
2 Semi-auto
3 Auto
Back Set