Motorola MTM800 Bedienungsanleitung Seite 99

Setting Operating Mode (
To enter the sub-menu,
press
Menu
This sub-menu allows you to select the
mode your MTM800 will be operating on.
To set up your operating mode:
• Select 2 Direct Mode, or 1 Trunk Mode, and press Ok.
It is not possible to switch from Direct Mode to Trunk Mode, if
the terminal is in Transmit Inhibit Mode.
To change the Operation Mode quickly you can use one of the
programmable keys (if set up by your Service Provider).
Setting Transmit Inhibit (TXI) Mode (
To enter the sub-menu,
press
Menu
This mode should always be set before
entering areas where transmission is
prohibited, e.g. in hospitals or in potentially explosive areas.
To activate the TXI Mode:
• Select 1 Activate, and press Ok.
The terminal will sound the "Transmit Inhibit" tone. The
display flashes between the Talkgroup name and the
message TXI Mode, and the solid amber LED indicates the
TXI Mode.
All menu options which cause transmitting are blocked in TXI
Mode. It is not possible to change the Talkgroup.
To deactivate the TXI Mode, e.g. after you have left the area
where transmission is prohibited:
• Select 2 Deactivate, and press Ok.
The terminal sounds the "Transmit Inhibit" tone and returns
back to Group Mode or Direct Mode, if Direct Mode was the
last selected mode.
6 2)
Menu
6 Networks - 2 Oper. Mode.
6 Networks - 3 TXI Mode.
1 Trunk Mode
1 Trunk Mode
2 Direct Mode
Back
6 3)
Menu
1 Activate
2 Deactivate
2 Deactivate
Back
Ok
Ok
93