Emergency In Tmo - Motorola MTM800 Bedienungsanleitung

Emergency in TMO

Sending an Emergency Alarm
Your MTM800 will send an Emergency Alarm (if configured
by your Service Provider):
• Automatically, upon entering Emergency Mode
• If you press
Mode.
• If you change group while in Emergency Mode.
The screen will show one of the following delivery reports:
• Alarm Sent
• Alarm Failed
In both cases, the screen returns within a few seconds to the
main screen of the Emergency mode.
Due to no delivery confirmation in DMO,
information confirms only sending the alarm.
Or - if configured by your Service Provider - your MTM800
will send an Emergency Alarm:
• If you press the Emergency button/footswitch without
entering Emergency Mode before.
- Other Emergency services such as starting TMO
Emergency Mode or initiating Emergency Private Call (if
supported by the infrastructure) will be unavailable.
- No visible and audio indication on sending Emergency
Alarm will be done.
Some systems do not support the Emergency Alarm feature when
the user is in a "Local Area Service" area. (See page 25.)
Making an Emergency Group Call
To initiate or answer a call while in Emergency mode:
Press and hold
1.
Wait for the talk permit tone (if configured) and talk.
2.
64
while the MTM800 is in Emergency
PTT
Alarm Sent