Motorola MTM800 Bedienungsanleitung Seite 116

• Scroll to Erase and press Ok to erase the current
template.
Sending and Editing a Predefined Template
Predefined mail templates are templates that are
programmed into your MTM800 by your Service Provider.
You are allowed to perform limited edit operations of the
predefined template and to send it, but you will not be able to
store the edited template or erase it from the Templates List.
1. Scroll to 3 Predefined and press Ok.
The first template in the Predefined
Template List is displayed (if no
predefined template exist, the message
No Predefined will be displayed).
2. Scroll through the Templates List using the navigation keys
and choose the required template (in the example, a
registration message is displayed).
A predefined message can only be sent from the Edit screen.
3. Press Edit. The message is now in the
predefined message editor.
4. Enter your message.
• To move the cursor forward -
press
• To move the cursor backward - press
• Press Clear to delete the character to the left of the
cursor.
A predefined message address is also defined by your Service
Provider during programming and cannot be changed.
5. Press PTT or
to send the message. The display will show one of the
following delivery reports:
Message Delivered — to indicate that the message was
successfully sent and received.
110
.
or the relevant one-touch numeric key
Register:
abc 27
Back Edit
Register:
abc 27
Clear Back
.