Receiving A Group Call In Idle Mode; Receiving A Group Call During An On-Going Group Call - Motorola MTM800 Bedienungsanleitung

The following screens show examples of how the caller's
private number (ID 7712) is displayed.
Range 1
Talkgroup 1
Status
Without alias and
Private number
For incoming call alert, see settings in the Tones menu option
(page 89)
When receiving a Group Call, your MTM800 will sound a "New
Group Call" tone (if configured by your Service Provider).
Receiving a Group Call with Scan Off
You can receive a group call from the selected talkgroup or
from the associated ATG only.

Receiving a Group Call in Idle Mode

In Automatic Mode Switch you can receive
a Group Call in any mode. Your MTM800
will automatically switch into Group mode
and receive the transmission.

Receiving a Group Call during an On-going Group Call

Depending on how the Service Provider has configured
incoming calls, the incoming call will either be:
• Forced upon you and will interrupt the on-going call (if the
incoming call has higher priority than the on-going call).
or
• Presented to you (if it has higher priority
than the on-going call).
> To accept the call, press Join.
> To cancel the call, press End.
36
ID: 7712
or
Talkgroup 1
Status
Private number
without alias
.
ID: David
or
Talkgroup 1
Status
Private number
with alias
Group In Use
TG 4
Status
ID: 7712
TG 4
End Join