Motorola MTM800 Bedienungsanleitung Seite 50

When the MTM800 detects the suitable
gateway, the Gateway icon will turn solid.
Selecting
DMO Group Call via Repeater
While in DMO, proceed as follows to choose the Repeater
option to set up a call via Repeater for the selected talkgroup:
1. Press Optns, use the navigation keys to scroll to 3 Config.
and press Ok.
2. Scroll to 3 Repeater and press Ok.
3. The MTM800 will use the first available
repeater for that talkgroup. The repeater
icon will flash upon selecting that option.
When the MTM800 detects the proper
repeater presence signal, the Repeater
icon will turn solid.
Selecting
DMO Group Call via Gateway and Repeater
While in DMO, proceed as follows to choose the Gateway
and Repeater option to set up a call via Gateway or Repeater
(Gateway preferred) for the selected talkgroup.
1. Press Optns, scroll to 3 Config. and press Ok.
2. Scroll to 4 GW + Rep and press Ok.
3. The display shows the last "GW + Rep."
type selection. Use the navigation key to
scroll to your selection and press Ok:
Automatic
first available gateway for that talkgroup. The Gateway icon
and the repeater icon will flash upon selecting that option.
Specific
specified Gateway address for that talkgroup.
Upon selecting "Specific", you will see one of the following
displays:
44
the MTM800 will use the
—
the MTM800 will use only the gateway with the
—
DMO Range1
DMO TG1
Back Ok
DMO Range1
DMO TG10
DMO Range1
DMO TG10
1 Automatic
2 Specific
Back Ok