Motorola MTM800 Bedienungsanleitung Seite 24

F1 to F3. Your Service Provider should program the numeric
and option keys with the relevant features. All the numeric
keys on the keypad are programmable. The following table
lists the programmable features and their availability in
specific MTM800 states/modes. For detailed information on
the features, see the relevant section in the user guide:
Feature
Talkgroup Switch
Current/Last
Switch Talkgroup
Talkgroup Scan
Home Revert
DMO/TMO
Status Message
Speaker on/off
Text Message
Template
Call Dial (Private,
Phone, PABX)
Transmit Inhibit
(TXI)
Covert Mode
Time & Date
If the one-touch feature is enabled, one-touch dial is disabled (see
page 59).
To use the one-touch feature:
• From any mode, press and hold the required numeric key
for a few seconds.
• Your MTM800 will display the number or function and act
according to the programmed feature.
18
Description
Switch to a specific talkgroup
Switches to the previous talkgroup (even if
the operation mode was different)
Enables/disables the Talkgroup Scan
function. (TMO only)
Puts the MTM800 back into Group mode
Toggles between DMO and TMO modes.
Sends a dedicated status message to a
dedicated address.
Directs voice audio to the earpiece of the
telephone style handset or to the
loudspeaker.
Sends a predefined/user defined template to
a dedicated address.
Initiates a call to a predefined entry in the
address book. (TMO only)
Toggles between activated and deactivated
TXI mode.
Toggles on/off covert mode
Shows time and date.