Motorola MTM800 Bedienungsanleitung Seite 105

3. Press More. The throughput is shown in
the second screen:
9 kbps (e.g.) — active packet data
session.
N.A. — standby packet data session.
Viewing Bandwidth Status (
The bandwidth percentage represents the number of
allocated time slots ("channels") during the data session.
1. Select 3 Bandwidth in the Packet Data sub-menu.
2. The bandwidth percentage is shown:
75% (e.g.) — active packet data
session,
N.A. — standby packet data session.
Your Service Provider has set the maximal number of time slots
to allocate to 1, 2, 3, or 4. The bandwidth percentage refers to
the possible number of slots (1, 2, 3, or 4) as 100%.
Example:
50% is displayed, if 2 of 4 possible slots are allocated.
100% is displayed, if 4 of 4 possible slots are allocated.
100% is displayed, if 1 of 1 possible slot is allocated.
Viewing Encryption Status (
1. Select 4 Encryption in the Packet Data sub-menu.
2. The encryption state of the ongoing
packet data session is displayed:
• Encrypted
• Not Encrypted (clear)
9 2 3)
Menu
9 2 4)
Menu
Throughput:
9 kbps
Back More
Bandwidth:
9 kbps
Back
Packet Data
Encrypted
Back
99