Description Of The Operating Controls And Indicators - Jungheinrich EFG-DH ac 10 Betriebsanleitung

2

Description of the operating controls and indicators

Item Operating control or
indicator
1 Steering wheel
2 Multi function display
Enhanced multi
function display
3 Steering column lock
4 Driving direction switch
Multi Pilot
Horn
5 Key switch
6 Master switch
Emergency Stop
7 Switch lever for special
equipment
8 Brake pedal
9 Accelerator pedal
10 Parking brake
11 Backrest adjustment
12 Weight indicator
“"Driver seat”"
13 Weight adjustment
“"Driver seat”"
Driver seat locking lever t For horizontal driver seat adjustment.
14
15 Dual-pedal control
Driving pedal „„Back-
ward“"
16 Dual-pedal control
Brake pedal
17 Dual-pedal control
Driving pedal „„Forward“"
t = Standard equipment
E 2
Function
t Steering the truck with 5 steering wheel turns
from left to right.
t
Indicates battery capacity, operating hours,
error, important warnings, wheel position and
drive direction (see section 3).
o
t The steering column is adjusted to the desired
distance and locked.
o Selection of the desired drive direction.
Controls the lift mast functions.
Trigger warning signal.
t Switches the truck's battery voltage on and off.
t The power circuits are interrupted, all electrical
functions switch off.
o e.g. indication whether the working lights are
switched on
t The truck is decelerated.
t The driving speed is continuously controlled.
t Secures the truck against rolling away when at a
standstill.
t The driver seat backrest is adjustable.
t Indicates the weight set.
t To adjust to the driver’'s weight for optimum seat
cushioning.
o Truck drives backwards when actuated.
Driving speed is controlled continuously.
o Truck is decelerated.
o Truck drives forwards when actuated.
Driving speed is controlled continuously.
o = Optional equipment