Displays And Controls - Jungheinrich EFG 535 Betriebsanleitung

2

Displays and Controls

Item Control /
Display
58 Parking brake lever
59 Steering wheel
60 Control panel with display
unit
61 SOLO-PILOT
MULTI-PILOT
62 Key switch
ISM access module*
Code lock*
63 Brake pedal
64 Accelerator pedal
65 Emergency Disconnect
switch
66 Side compartment
control panel
67 "Reverse" accelerator
double pedal control
68 "Forward" accelerator
twin pedal control
Z
*If the truck is equipped with an ISM access module or Can Code refer to the "ISM
Access Module" or "CanCode" operator manuals.
Function
t Applies / releases parking brake
t Steers the truck.
t Displays the battery capacity, service hours,
errors, key warning indicators, wheel
position and travel direction.
t
Operates the following functions:
o
– Fwd/rev. travel direction
– Lift/lower load handler
– Mast forward / reverse tilt
– Horn button
– Sideshifter left / right (o)
– Auxiliary hydraulics (o)
t Switches control current on and off.
Removing the key prevents the truck from
being switched on by unauthorized
personnel.
o
Switches the truck on.
t Provides infinitely variable braking control.
t Infinite travel speed control
Switches power supply on and off.
t
Switches electric options on and off
o
Applying the accelerator pedal reverses the
truck.
The travel speed is infinitely controlled.
o
Applying the accelerator pedal moves the
truck forwards.
The travel speed is infinitely controlled.
53