C Transportation And Commissioning; Transportation By Crane; First Commissioning - Jungheinrich EFG-DH ac 10 Betriebsanleitung

C Transportation and commissioning

1

Transportation by crane

m
Only use lifting equipment with sufficient
carrying capacity
(loading weight = own weight + battery
weight; see identification plate of the
truck).
–– Park the truck and render it safe (refer
to chapter E).
–– Attach the lifting gear to the cross
member of the hoist frame (1) and to
the tow bar (2).
m
The lifting gear must be attached to the attachment points in such a manner that it
absolutely cannot slip and cannot come into contact with any attachments or the over-
head guard of the truck when the truck is lifted.
2

First commissioning

f
Commisioning and instruction of the driver must only be carried out by personnel with
appropriate training. If several trucks are delivered it must be assured that only load
suspension devices, hoist frames and basic trucks with identical series number are
assembled.
m
Drive truck with battery power only.
Rectified alternate current will damage
the electronics. Cables connected to the
battery (towing cable) must be less than
6 meters in length.
2
1
C 1