Capacity Label Fork Tines (Basic Device); Capacity Label Attachment - Jungheinrich EFG-DH ac 10 Betriebsanleitung

4.3

Capacity label Fork tines (basic device)

The fork arm load diagram indicates the carrying capacity Q of the truck in kg. The
maximum load capacity at different load centers D is given in a diagram (in mm).
4.4

Capacity label Attachment

The attachment load diagram indicates the carrying capacity Q of the truck in connec-
tion with the respective attachment in kg. The attachment serial number indicated in
the load diagram must correspond to the ID plate of the attachment, since the manu-
facturer must state the carrying capacity specially for each attachment. It is indicated
in the same way as the carrying capacity of the truck itself and must be determined
accordingly.
The arrow-shaped markings (31 and 32)
at the inner and outer mast indicate the
lifting height limits that are prescribed in
the load diagram.
31 32
B 13