F) Displaying Or Deleting Of The Maximum/Minimum Values - Conrad WS 1173 Bedienungsanleitung

f) Displaying or Deleting of the Maximum/Minimum Values

Briefly press the button "MIN/MAX" repeatedly to switch between the following displays:
• Maximum values ("MAX" in the display)
• Minimum values ("MIN" in the display)
• Current measured values

If you do not push any button for 10 seconds, the display mode for maximum/minimum
values is left automatically.
If you want to know when the respective maximum and minimum values have appeared, first
call display of the maximum or minimum values with the button "MIN/MAX" as described above.
Repeatedly push the button "+" briefly to select the desired value (the respective selected value
flashes in the display):
• Indoor humidity
• Indoor temperature
• Outdoor humidity
• Outdoor temperature
• Outdoor dewpoint temperature
• Barometric pressure
In the display, the precise time and date are displayed, e.g. for when the lowest outdoor
temperature was measured over night.
While a single maximum or minimum value is displayed and flashes, it can be deleted by
pushing the button "SET" for 2 seconds.
The current measured value is displayed as the new maximum and minimum value until
another change happens.

It is not possible to delete all maximum and minimum values at once. You need to
delete each value separately.
This is a little more difficult than for common weather stations, but it enables you to
choose yourself which maximum and minimum values you want to delete or keep.
51