A tendency display on the left next to the temperature display or on the right next to the air
humidity shows you the tendency of where the readings are going:
Increasing
b) Switching outdoor sensors automatically
Switching between the available outdoor sensors can be carried out automatically by the
weather station (automatic switching approx. every 3-4 seconds).
Press the "CHANNEL" button for about 2 seconds. The "
when automatic switching is activated.
To switch off this function, simply press the "CHANNEL" button again for approx. 2 seconds,
the icon disappears again.
c) Displaying MIN/MAX values (temp./air humidity)
• The minimum and maximum values for each sensor are stored separately. This is why you
first have to select the desired sensor by pressing the "CHANNEL" button.
• By briefly pressing the "MEM" button, you can then switch in sequence between the display
of the minimum value ("MIN" on display), the maximum value ("MAX") and the current value.
• When there is a minimum or maximum value displayed ("MIN" or "MAX" on display), you can
switch to the other sensors with the "CHANNEL" button.
d) Deleting MIN/MAX values
• First of all, activate the display of the MIN or MAX values with the "MEM" button.
• Delete all stored MIN/MAX values now by pressing the "MEM" button for a longer period of
time. Straight after deleting, the currently read temperature or air humidity value is
displayed as minimum or maximum value.
68
Steady
Decreasing
" icon appears on the display