B) Temperature/Air Humidity Sensor; Wind Sensor; Rain Sensor - Conrad WH1070 Bedienungsanleitung

• Wind speed, either in mph, m/s, knots or Beaufort
• Windchill factor
• Dew point
• Weather forecast with weather symbols and trend display
• Arrow symbols for display of the weather trend
• Alarm function for different display values
• Storm warning alarm
• Saving of minimum and maximum values with the time and date
• Bright display illumination
• Radio-controlled DCF77 time display, manual time setting possible
• Display of weekday and date, month, year
• Time zone (+/-12 hours) adjustable
• 12/24 hr display format
• DCF reception via the temperature/air humidity sensor outdoors
• Base station for wall or table mounting

b) Temperature/air humidity sensor

The temperature/air humidity sensor determines the temperature and the air humidity
in the direct proximity of the installation site (outdoors). The sensor is also the receiver
for the DCF signal. At the same time, the temperature/air humidity sensor is the central
connection unit between the base station and the outdoor sensors. The tempera-
ture/air humidity sensor takes care of the voltage supply and data transmission of the
sensors. The wind and rain sensor must be connected with the temperature/air humid-
ity sensor with a cable for this purpose. The data transmission between the tempera-
ture/air humidity sensor and the base station is wireless.
c) Wind sensor
The wind sensor determines the wind speed at the installation site. The determined
data is transmitted to the temperature/air humidity sensor via cable.
d) Rain sensor
The rain sensor determines the rain quantity at the installation site. The determined
data is transmitted to the temperature/air humidity sensor via cable.
47