RADEMACHER RolloTube I-line Funk Small Montageanleitung Seite 55

Connect / disconnect the DuoFern central operating unit with the radio code
Button
9.
10.
11.
OK
12.
13.
OK
14.
M
Display
Activate the central operating unit's "connect" or "disconnect" mode.
= connect mode
= disconnect mode
NOTE
If.disconnected,.the.radio.tubular.motor.will.be.deleted.from.all.of.the.groups.in.which.it.was.previously.positioned.
After the connection, select the following for the new actuator:
a) a group number
b) a member number
Confirm the member and group numbers.
Then enter a name for the radio tubular motor.
Confirm the name.
The.number.of.logged.on.devices.is.again.indicated.on.the.display..The.radio.tubular.motor.and.the.DuoFern.central.operating.unit.are.now.
either.connected.or.disconnected.
Back to the DuoFern central operating unit's normal view
Press.the.key.repeatedly.
NOTE
The.radio.tubular.motor.can.now.be.configured.via.the.DuoFern.central.operating.unit.
EN
55