Environmental Friendliness - Siemens simovert masterdrives Betriebsanleitung

05.2006
13

Environmental Friendliness

Environmental The number of components has been significantly reduced over earlier
aspects during the
converter series by the use of highly integrated components and the
development
modular design of the complete series. Thus, the energy requirement
during production has been reduced.
Special significance was placed on the reduction of the volume, weight
and variety of metal and plastic components.
Plastic components ABS:
used
LDPE: Capacitor ring
PA6.6: Fuse holders, mounting rail,
Halogen-containing flame retardants were, for all essential
components, replaced by environmentally-friendly flame retardants.
Environmental compatibility was an important criterium when selecting
the supplied components.
Environmental Purchased components are generally supplied in recyclable packaging
aspects during
materials (board).
production
Surface finishes and coatings were eliminated with the exception of the
galvanized sheet steel side panels.
ASIC devices and SMD devices were used on the boards.
The production is emission-free.
Environmental The unit can be broken down into recyclable mechanical components
aspects for disposal
as a result of easily releasable screw and snap connections.
The plastic components are to DIN 54840 and have a recycling symbol.
After the service life has expired, the product must be disposed of in
accordance with the applicable national regulations.
Siemens AG 6SE7087-6JK50
SIMOVERT MASTERDRIVES
PMU support panel
LOGO
capacitor holder, cable retainer,
connecting strips, terminal strip,
supports, PMU adapter, covers,
cable holder
Operating Instructions
Environmental Friendliness
PC: Covers
PP: Insulating boards
bus retrofit
PS: Fan housing
UP: Tensioning profile
retaining bolts,
tensioning disk
13-1