Siemens simovert masterdrives Betriebsanleitung Seite 212

Connecting-up
Fig. 7-2
NOTE
Due to the 230 V fan a transformer is integrated into the converters.
The terminals on the primary side of the transformer may have to be
reconnected corresponding to the line voltage.
7-4
PMU
X300
X108
X101
Mount.pos. 1 (CUMC)
S1
X103
Encoder card in slot C
S2
Mounting position 3
Mounting position 2
Aux. contactor, external
DC24 V-supply X9
Shield connection
for control cables
Terminals for setting
the fan voltage
Motor connection
Connection overview for type G
Mains connection
6SE7087-6JK50
Operating Instructions SIMOVERT MASTERDRIVES
05.2006
DC link
connection
PE1 / GND
PE2 / GND
Siemens AG