Device Settings - Kemper KHS-Mini MASTER Einbau- Und Bedienungsanleitung

8.1.4.3

Device settings

In the "Device settings" submenu, the individual KHS Mini System Controls with the
integrated actuators and sensors are logically linked to each other. Illustration 8.25
shows an overview of the "Device settings" submenu. Press the "↑" and "↓" buttons and
confirm with "OK" to select the desired control. Then select the desired linking option
(controller type, valve type, sensor type, alarm relay display, operating cycles) with
"OK". After that, a selection opens in which the related component can be selected. Press
"OK" again to open the device-specific setting facilities. They are explained in detail
based on the sample project.
Device selection
03
04
Ill. 8.25 Overview of the "Device settings" submenu
Manual KHS Mini System Control MASTER
Control type
Valve
Select sensor
Select sensor
Alarm relay display
Delete operating cycles
25
.....
C-valve
safety/leak detection
.....