Kemper KHS-Mini MASTER Einbau- Und Bedienungsanleitung Seite 74

Password
To protect the controller from interference, a password can be configured. If a password
has been stored, the password will be queried before every setting (see Ill. 8.19). To do
that, select the "Password" menu item in the system control submenu with "OK". Use the
"↑" and "↓" buttons to select the digit. Press the "OK" button to confirm and to select the
next digit. Pressing "OK" again stores the set password and the system control submenu
opens again.
Ill. 8.18 Setting the password
Ill. 8.19 Password query
Default settings
To reset the control to the default settings, select the menu item "Default setting" in the
system control submenu with "OK". A query then opens. If it is acknowledged with "OK",
the system is reinstalled.
Ill. 8.20 Restore the default settings
Restart the MASTER
To restart the controller, select the menu item "Restart MASTER" in the system control
submenu with "OK". A query then opens. If it is acknowledged with "OK", the system is
restarted.
Ill. 8.21 Restart -MASTER-
Manual KHS Mini System Control MASTER
Note:
The password "0000"
is the factory default
setting.
Note:
All previous
gurations will be lost!
23
confi-