Changing Operation Mode - struers Axitom Gebrauchsanweisung

Changing Operation Mode

30
Axitom
Instruction Manual
To change the operation mode, go to the CONFIGURATION menu.
Select Operation mode to get access to the OPERATION MODE
PARAMETERS menu.
Push knob to select Pass code.



Use the  and  keys and the knob to enter the current
pass code (The default pass code is '2750'.):
Use the  and  keys to select digits ( moves to the left,
 moves to the right).
Turn knob to change the digits and press knob to enter the
pass code.


Push knob to select Configuration.


Select the desired operation mode and push knob to
confirm.