Optifeed - struers Axitom Gebrauchsanweisung

OptiFeed

44
Axitom
Instruction Manual
During cutting, Axitom continuously measures the load on the cutting
arm.
The pre-set Feed and Force values are interpreted as maximum
values. Throughout cutting, Axitom will try to stay as close to these
values as possible.
The factors that determine the load are the shape and properties of
the workpiece.
Whenever the set maximum Force limit is reached, Axitom will
reduce the Feed rate to be able to maintain the present force.
The figure below illustrates the increase in force as the cut-off wheel
gets closer to the centre of a round workpiece.