struers Axitom Gebrauchsanweisung Seite 65

Manual cleaning
Axitom
Instruction Manual

Push knob then turn it to adjust the AxioWash cycle time.
Push the knob to confirm the setting.


Press the  key to start the cleaning cycle.

Lift the flushing hose from its holder. The recirculation pump is
activated.

Point the flushing hose towards the bottom of the cutting
chamber.

Turn on the water by pressing the rear of the nozzle.

Clean the cutting chamber thoroughly.

Turn off the water by releasing the rear of the nozzle and return
the flushing hose to its holder. The recirculation pump will then
stop.
61