Changing Cutting Mode And Cutting Parameters; Changing Cutting Mode - struers Axitom Gebrauchsanweisung

Changing Cutting Mode and
Cutting Parameters

Changing Cutting Mode

Axitom
Instruction Manual
Turn the multi-function knob until the cutting mode text is highlighted
and press the knob to display the SELECT CUTTING MODE menu.
Turn the multi-function knob to highlight a cutting action, and press
the knob to select it and return to the CUTTING display. Press the
 key to return to the CUTTING display without changing the
cutting action. The selected cutting action, Direct Cut in the example
above, appears on the top bar of the CUTTING display.
Select Single Cut or one of the MultiCut modes by turning the multi-
function knob until the cutting mode icon is highlighted, press the
knob to display the SELECT MULTICUT MODE menu.
MultiCut modes are optional and require an X-table.
Note:
15