struers Axitom Gebrauchsanweisung Seite 3

Axitom
Instruction Manual
Axitom
Safety Precaution Sheet
To be read carefully
before use
1. The operator(s) should be fully instructed in the use of the machine and
its cut-off wheels according the Instruction Manual and the instructions
on the cut-off wheels.
2. The machine must be placed on a safe and stable support. All safety
functions of the machine must be in working order. The machine must
be levelled by means of the adjustable legs provided.
3. The unit must be installed in compliance with local safety regulations.
4. Prior to lifting the unit by the built-in truck lifting point, ensure that the
boom is properly secured with the locking pins provided. Before
transport, secure the cutting arm with the locking system provided.
5. To achieve maximum safety and lifetime of the machine, use only
original Struers consumables.
6. Use only intact cut-off wheels. The cut-off wheels must be approved for
a spindle speed of min. 1950 rpm / 42 m/s. Do not use sawblades.
7. Observe the current safety regulations for handling, mixing, filling,
emptying and disposal of the additive for cooling fluid.
Do not use flammable cooling fluid.
8. The workpiece must be securely clamped in the quick-clamping device
or the like. Large or sharp workpieces must be handled in a safe way.
9. Struers recommend the use of an exhaust system as the cutting
materials may emit harmful gasses or dust. See the instructions of the
cut-off wheel.
10. The machine emits only moderate noise. However, the cutting process
itself may emit noise, depending on the nature of the workpiece. In
such cases, use of hearing protection is recommended.