MultiCut 3 (option)
Select the MultiCut 3 method
38
Axitom
Instruction Manual
The MultiCut 3 option permits the cutting of several samples of
different widths at different relative distances from the 'zero', or
starting position. The distances are manually entered into the Axitom.
To set up cutting using MultiCut 3 mode:
From the Cutting display, turn the multi-function knob until the
cutting mode icon is highlighted, press the knob to display the
SELECT MULTICUT MODE menu.
Turn the multi-function knob to highlight MultiCut 3, press the
knob to select it.
The MultiCut 3 set up menu will appear