Changing Operation Mode
Discotom-60 /-65
Instruction Manual
To change the operation mode:
From the CONFIGURATION menu, select Operation mode to
enter the OPERATION MODE PARAMETERS menu.
Push knob to select Pass code.
Use the menu key to move the cursor (digit selected).
Pressing the key once moves the cursor one place to the
left. (The default pass code is '2750'.).Turn knob to change
the digit then press the menu key to move to the next digit.
Push the knob to enter the code.
Push knob to select Operation mode.
Select the desired operation mode and push knob to
confirm.
39