Eko CORE Benutzerhandbuch Seite 14

14. Eko App
and networking security features to protect patient data that is created and
stored using this software, in addition to security features embedded in the
system. Update to the latest version of the Eko App.
15. Electrical Emission and Device
Specification Tables
The Eko Electronic Stethoscope System is intended for use in the electromagnetic environment specified
below. The user of the Eko Electronic Stethoscope System should assure that it is used in such an
environment.
Applicable
Emissions Test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic Emissions IEC
6100-3-2
Voltage fluctuations / flicker
emissions IEC 61000-3-3
Warning: The use of accessories other than those specified, with the
exception of accessories sold by Eko as replacement parts, may result
in increased emissions or decreased immunity of the Eko Electronic
Stethoscope System.
Warning: The Eko Electronic Stethoscope System should not be used
adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the Eko Electronic Stethoscope System should be observed to
verify normal operation in the configuration in which it will be used.
14
Download the Eko app, available on the App Store® and
Google Play and follow the on-screen instructions to connect
to CORE™. Select Eko App features may require a paid
subscription.
Bluetooth must be enabled in the mobile or desktop's
Bluetooth settings in order to use CORE™ with the Eko App.
When using the Eko Dashboard and Eko App, enable device
Guidance and Manufacturer's
Declaration - Electromagnetic Emission
Compliance
Group 1
Class B
Not
Applicable
Not
Applicable
Electromagnetic
Environment- Guidance
The Eko Electronic Stethoscope System uses RF energy
only for its internal function. Therefore, its RF emissions
are very low and are not likely to cause any interference
in nearby electronic equipment.
The Eko Electronic Stethoscope System is suitable
for use in all establishments, including domestic
establishments and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.