Werbung
Verfügbare Sprachen
Verfügbare Sprachen
VC-A30G(BR) VC-A30S(BR)
VC-A30GM(BR) VC-A30SM(BR)
VC-A30Q0M(BR) VC-A30SV(BR)
ADJUSTMENT, REPLACEMENT AND ASSEMBLY
OF MECHANICAL UNITS
Here we will describe a relatively simple service
We are sure that the easy-to-handle tools listed
work in the field, not referring to the more
below would be more than handy for periodical
complicated repairs which would require the use of
maintenance to keep the machine in its original
special equipment
and tools (drum
assembly
working condition.
replacement, for example).
TOOLS NECESSARY FOR ADJUSTING THE MECHANICAL UNITS
The following tools are required for proper service and satisfactory repair.
[no]
ighem | Pereno. ode] configuration
Reel Disk Height Adjusting
Ji
JiGRHOO002
EB
=
These jigs are used for checking and
adjusting the reel disk height
Master Plane Jig
JiGMPO0001
JiGACH-F18
Torque Gauge (90g)
JiGTGO090
These jigs are used for checking and
Torque Gauge (1.2 kg)
JiGTG1200
| CN
adjusting the torque of take-up and
supply reel disks.
Gauge Head
JiGTHOO06
1.
This cassette torque meter is used
"
for checking and adjusting the
JiGVHT-063 | CZ
torque of take-up for measuring
tape back tension.
Tension Gauge (300g)
JiGSGO300
7
Tension Gauge (2.0kg)
JiGSG2000
Hex Wrench (0.9mm)
JiGHW0009
Hex Wrench
(1.2mm)
JiGHW001
Fae |
Hex Wrench (1.5mm)
JiGHW0015
ae |
4
2
BY
This Jig is used for setting the A/C
head tilt.
A/C Head Tilt Adjusting Jig
Cassette Torque Meter
There are two Gauges used for the
tension measurements, 300 g and
2.0 kg.
These Jigs are used for loosening or
tightening special hexagon
type
screws.
N
Thi
i
iall
Alignment Tape (PAL)
Gneeey
#2
is tape
is especially
used for
JiGDT-0001
electrical fine adjustment.
This is used for replacement of the
VCR's upper drum.
Drum Replacing Jig
= Oo
Werbung
