Werbung
Verfügbare Sprachen
Verfügbare Sprachen
VC-A30G(BR) VC-A30S(BR)
VC-A30GM(BR) VC-A30SM(BR)
VC-A300M(BR) VC-A30SV(BR)
REPLACEMENT
AND
HEIGHT
CHECKING
AND ADJUSTMENT OF REEL DISKS
1. Remove the cassette housing control assembly.
2. Set the mechanism in the playback mode with no
cassette tape in place. Unplug the power cord.
3. Set the idler gear in the center (neutral).
@ Removal (Supply reel disk)
1. Remove the tension band @.
(Take care not to
deform it.)
2. Unscrew the screw @ and remove the supply reel
retainer assembly ©.
3. Release the supply reel disk catch and back
tension lever @.
4. Pull the supply reel disk upward.
Notes :
1. Take care not to deform the tension band.
2. Check and adjust the tension pole position. (See
page 21.)
3. Be careful not to damage the gear and the idler
gear on the supply reel disk.
4. Press the tension band
in the direction of the
arrow for removal (See Figure 1-20(b)).
Supply
reel disk
Tension
band
=
Supply
reel disk catch
3) Back tension lever
(a)
Note:
When the tension band is pressed in the
direction
of the arrow
for removal,
the
catch is hard to be deformed.
Zs
a
(b)
Figure 1-20.
b) Supply
reel
retainer ass'y
16
Removal (Take-up reel disk)
. Unscrew the screw
© and remove the take-up
reel retainer.
. Release the take-up reel disk catch ©.
. Pull the take-up reel disk @ upward.
—-
@
Wn
Take-up
reel disk
Take-up
reel
disk catch
Figure 1-21.
Reassembly (Supply reel disk)
. Clean the reel disk shaft © and apply oil to it.
. Release the supply reel disk catch @ and back
tension lever @.
3. Install a new supply reel disk @ onto the shaft.
4. Replace the tension band © around the supply
reel disk, and insert it to the hole of the tension
arm.
5. Replace the supply reel retainer assembly
© in
place, and tighten up the screw @.
Notes:
1. Take enough care not to deform
the tension
band during installation of the supply reel disk.
2. Be careful not to damage the supply reel disk
gear, back tension lever, catch, or the like with
tools.
N—-
@
Tension
band
Screw
Supply reel
retainer ass' y
he
3) Back
tension
lever
Supply reel
. i.
disk catch
ae
OSS
Figure 1-22.
Werbung
