Heidolph Hei-VAP Core Betriebsanleitung Seite 93

Assembly
Control panel
The control panel support is located in
front of the flask drive.
Warning:
Risk of poisoning!
If you operate the device inside a fume hood and have to reach the
control panel during a running process, you may be endangering your
health when you open the fume hood.
Remove the control panel and position it outside the fume hood.
Mounting the control panel on the
support.
➜ Connect the cable from the back of the
control panel to the connection cable
in the support.
➜ Place the control panel on the support
so that the buttons on the back of the
panel are seated in the recesses of the
support.
➜ Then slide the control panel down to
the stop.
✓ The control panel is now ready for use.
Control panel support
Connection cable
93