Heidolph Hei-VAP Core Betriebsanleitung Seite 84

Assembly
Heating bath
Insert the heating bath
✓ A sliding base plate with a raised guide
rail is located on the right side of the
base device.
➜ Place the heating bath with the recess
to the left on the guide rail.
➜ Move the heating bath slightly to the
right and left, so that it locks securely.
Moving the heating bath
When using larger evaporating flasks or adapters between evaporating flask and vapor
tube, it may be necessary to increase the distance between the heating bath and the
drive.
✓ The basic device is positioned on a stable, level surface.
✓ There is about 20 cm space for movement on the same base to the right of the
heating bath.
➜ Hold the heating bath by both handles and pull it to the right to the desired position.
Guide rail
Heating bath
84
Base plate
Recess