Heidolph Hei-VAP Core Betriebsanleitung Seite 88

Assembly
Condenser:
Glassware set G5 Dry ice cooler
✓ The cooler is mounted on the drive.
➜ Screw the ventilation cap onto the
opening opposite the vapor tube.
➜ If you are working with inert gas,
screw the inlet tube with inert gas
valve onto the opening above the
ventilation cap.
➜ Place the red sealing ring in the groove
at the top of the cooler flange.
➜ Place the white PTFE ring above it with
the collar facing upwards in the cooler
flange.
➜ Now insert the jacket trap into the
condenser.
✓ The flange is drawn in by the vacuum
and the system is closed vacuum-tight
by the installed seal.
➜ Place the black lid on top to protect
your dry ice.
Inert gas valve
Ventilation cap
88