Heidolph Hei-VAP Core Betriebsanleitung Seite 86

Assembly
✓ Coupling and Easy-Clip are screwed
together.
➜ Push the coupling of the vapor tube
together with the Easy-Clip onto the
vapor tube. (Direction and sequence as
shown under "Installation parts")
➜ Push the clamping sleeve with the
bead toward the glass onto the vapor
tube until it clicks into place.
➜ Insert the vapor tube with the
clamping sleeve first from below into
the drive and screw it tight.
➜ Press the locking knob during the last
quarter turn.
Vapor tube, Easy-Clip and coupling
86