Heidolph Hei-VAP Core Betriebsanleitung Seite 85

Assembly
Vapor tube
Assembly parts
▪ Vapor tube
▪ Flask clamp Easy-Clip
▪ Coupling
▪ Clamping sleeve
The Easy-Clip flask clamp is pre-mounted
in the NS29 size. The Easy-Clip NS24 is
included for smaller flasks.
When the device is delivered, the coupling
for the vapor tube and the condenser are
pre-assembled.
➜ Press and hold the locking knob below
"lock" for a quarter turn.
➜ Unscrew the coupling of the vapor tube
together with the Easy-Clip to the right
of the drive.
➜ Unscrew the coupling for the
condenser to the left of the drive.
➜ Remove the tension spring and the
PTFE seal on the condenser side.
Caution:
Possible contamination, leakage, damage to your device
A damaged seal can prevent reaching the desired vacuum, can con-
taminate your sample or damage your device.
Never work with a damaged or worn PTFE seal. Inspect the PTFE seal
regularly and replace it if necessary.
Coupling vapor tube
Clamping sleeve
Coupling
condenser
Locking knob
vapor tube
Tension spring
85
Vapor tube
Flask clamp Easy-Clip
Drive Flask clamp
Easy-Clip
Coupling
vapor tube
PTFE seal