Heidolph Hei-VAP Core Betriebsanleitung Seite 83

Assembly
Warning:
Risk of crushing! Risk of burns!
If the device is switched on, the heating or rotation can be started
unintentionally. This may injure and burn your hands.
Install the device only when the device is switched off.
Transportation lock
(Motor lift only)
The transportation lock must be removed before start-up of the device. Retain the
transportation lock for a possible return.
The transportation lock consists of three M5x8 screws and a connecting metal sheet with
holes for securing the position.
Remove transportation lock pior to
start-up
✓ The basic device is positioned on a
stable, level surface.
➜ Connect the heating bath.
➜ Connect the control panel.
➜ Switch the device on.
➜ Use the provided allen key to loosen
the 3 screws and remove the metal
sheet of the transportation lock.
➜ Move the flask lift to the highest
position.
➜ Switch the device off.
✓ You can now switch the device back on
and put it back into operation.
➜ Retain all parts of the transportation
lock for later use.
Transportation lock
83