Load Program; Save Program; Mma Welding Parameters; Welding Current I 1 For Mma - REHM INVERTIG.PRO COMPACT 240 DC Betriebsanleitung

Functional description

3.10.2 Load program

A program is loaded using the press button [31].
 Briefly pressing the press button P [31] lights up the display LED "Load" [33]
for program load.
 Use the press and rotate button [27] to select the required program number
(e.g. "Pr34".). Only the program numbers that have already been assigned will
appear in the digital display [26].
 Press and hold down the P [31] button for 2 seconds. When loading the
values, the digital display [26] will go out for 0.5 seconds. The required
program is now loaded.

3.10.3 Save program

A program is saved using the press button P [31].
 The require machine settings (welding parameters) are made on the
INVERTIG.PRO COMPACT machine.
 Briefly pressing the press button P [31] selects the Save function [32].
 Use the press and rotate button [27] to select the required program number.
The program number is displayed in the digital display [26]. When a program
number has already been assigned "Pr" precedes the number, and there is a
dot "." after the number (e.g. "Pr34."). When the program number has not yet
been assigned, two lines appear before the number "--" (e.g. "--35").
 Press and hold down the P [31] button for 2 seconds. The program is saved.
When saving the values, the digital display [26] will go out for 0.5 seconds.
The required program has now been saved.
Note: It is recommended to create a table to manage the programs. This should
contain the appropriate program number and the task associated with
it.
3.11

MMA welding parameters

With the press button [34] you select the MMA welding parameters, welding
current I , Arc Force and Hot Start for MMA welding, the display LEDs [35]
1
indicate the selected parameters by lighting up.
3.11.1 Welding current I
The press and rotate button [27] can be used to steplessly set the welding
current I .
1
INVERTIG.PRO
COMPACT
240 DC / AC/DC
MMA
3 A ...240 A
for MMA
1
INVERTIG.PRO INVERTIG.PRO
COMPACT COMPACT
280 DC / AC/DC 350 DC / AC/DC
3 A ...280 A 3 A ...350 A
GB
INVERTIG.PRO
COMPACT
450 DC / AC/DC
3 A ...360 A
29