Coolant Monitoring - REHM INVERTIG.PRO COMPACT 240 DC Betriebsanleitung

Water cooling
7.5.2

Coolant monitoring

The water level in the tank must be checked before using the water cooling unit.
If the cooling liquid level is lower than ¾ of the tank capacity, cooling water must
be topped up. In order to obtain the best possible torch cooling, the reservoir
must be filled to the top. Add cooling liquid if necessary. Only use original
GB
Rehm coolant (order number 168 0075).
Coolants are harmful to the environment; they must not be released into the
sewer system.
Dispose of these materials via appropriate problem material collection stations.
If maintenance or repair work is carried out on this device by persons who have
not been trained by REHM and authorised to carry out this work, the warranty
provided by REHM will be invalidated.
51