Cleaning The Inside Of The Unit; Correct Disposal - REHM INVERTIG.PRO COMPACT 240 DC Betriebsanleitung

Maintenance work
Task
Check the functions of the error current
protection switch
Connection lines and torch hoses checked by
professionals, check should be logged in the
relevant log book
Check may need to be carried out more
often in order to meet local regulations.
Entire welding unit checked by professionals,
check should be logged in the relevant log
book
Check may need to be carried out more
often in order to meet local regulations.
9.3

Cleaning the inside of the unit

If the REHM welding unit is used in a dusty environment, then the inside of the
unit must be cleaned regularly by vacuuming or blasting.
The frequency of the cleaning process depends on the conditions under which it
is used. Use clean, dry air to clean the unit or a vacuum cleaner.
If maintenance or repair work is carried out on this unit by personnel who have
not been trained by REHM and thus are not authorised to carry out the work, this
will void your guarantee and warranty claims over REHM.
9.4

Correct disposal

Only applies to countries in the EU.
Do not put electrical tools in the household rubbish.
The European directive 2002/96/EG regarding the disposal of electronic an
electrical goods and the implementation of such in national law means that used
electrical tools must be collected separately and sent for environmentally-friendly
recycling.
Interval
Daily
(with flying objects)
Otherwise, monthly
Every six months
Once a year
57
GB