Weidmuller AC SMART ECO Bedienungsanleitung Seite 67

► Carry out a visual inspection and create a commissioning protocol before
initial commissioning.
► Observe the requirements for the installation site, see Chapter 15.
Improper installation may cause water to get into EV charging box. This could
result in an electric shock.
► Only operate the EV charging box if it has been assembled and installed
as described in the assembly and installation instructions.
► The IP protection class is only achieved if the EV charging box is
assembled and installed as described in the assembly and installation
instructions.
► Do not use a pressure washer to clean the EV charging box.
► Only clean the EV charging box with a soft, lightly moistened cloth.
Risk to life due to fire
Foreign objects or dirt in the plug contacts can cause a fire.
► Check the plug contacts for foreign objects and contamination.
► Do not insert any objects into the plug contacts.
► Remove light contamination, for instance dust or sand, by blowing it out.
► Heavy contamination must be cleaned by an electrician.
CAUTION!
Risk of injury if the EV charging box is damaged
A damaged or incomplete EV charging box can lead to malfunctions and
hazards.
► Only use the EV charging box and its accessories if all parts are
undamaged.
► If you find damage on the EV charging box, commission an electrician to
disconnect the EV charging box from the power supply.
Risk of injury from falling parts
Falling parts can cause hazards and injure personnel.
► Do not place any objects on the installed EV charging box.
► Hang the charging cable on the cable tray when it is not in use.
2.4 Product modifications
The EV charging box may not be modified in any way. Product modifications
interfere with the safety and proper function of the EV charging box.
For your safety
Operating instructions – AC SMART 67