Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Prerequisite
104
Operating instructions – AC SMART
10
Operating the EV charging box
CAUTION!
Risk of injury if the EV charging box is damaged
A damaged or incomplete EV charging box can lead to malfunctions and
hazards.
► Check the EV charging box and its accessories for obvious damage before
each use.
Damage to the charging cable and the EV charging box
Pulling or tearing the charging cable can cause damage to the cable and the
EV charging box.
► To remove the charging cable, always pull on the plug and not on the
cable.
Danger of tripping due to a charging cable lying around
If the charging cable is lying on the floor, people may trip over it and the cable
may be damaged by crushing or kinking.
► Lay the charging cable so that it cannot be crushed or bent and there is no
risk of tripping.
10.1 Charging the vehicle
The EV charging box is ready for operation and the status LED is continu-
ously illuminated green. If the status LED is not illuminated green, either the
status LED is inactive or the EV charging box is not ready for operation, see
Chapter 12.
Starting the charging process (SOCKET variation)
Always connect the charging cable to the EV charging box first, and then to
the vehicle.
► Connect the charging cable to the charging socket of the EV charging box.
► Connect the charging cable to the vehicle.
Both charging plugs are interlocked. The status LED on the EV charging box
is illuminated blue.
If no authentication is configured (Freemode), then the charging process will
start automatically. The status LED on the EV charging box is illuminated blue
and pulsing.
If user authentication is configured, additional steps are required and will
depend on the type of authentication, see Chapter 10.2.
Werbung
