Drying; Required Materials; Drying Procedure; Sterilisation - mectron starjet Gebrauchs- Und Wartungsanleitung

CLEANING, DISINFECTION AND STERILISATION
6.7

Drying

6.7.1 Required Materials
• Compressed air;
6.7.2 Drying Procedure
Thoroughly dry all parts of the polisher
nozzle, both internally and externally. To
do so, blow compressed air both exter-
nally and through the internal through-
hole. This will prevent the appearance of
stains, streaks on the surface, or oxida-
tion inside the polisher nozzle;
Dry the K9 wrench using a soft, low-lint
cloth.
Thoroughly dry all parts of the clean-
ing needle by blowing them with com-
pressed air.
6.8

Sterilisation

6.8.1

Preparation

Seal the polisher nozzles individually in-
side a disposable bag for sterilisation.
• Soft, low-lint cloth.
1
2
1
35